2-Pack OVONIC 11.1V 3S 850mAh 160C LiPo Battery with XT30 for 3" Ducted Cinewhoops & 3" Light Toothpick Cruisers

Overview

Powering 3-inch ducted cinewhoops carrying HD action cameras or pushing extended airtime on 3-inch light toothpick cruisers requires a higher capacity reserve that holds flat voltage under continuous duct drag.

The OVONIC 11.1V 3S 850mAh 160C LiPo battery delivers an expanded 9.44Wh capacity volume in a lightweight 77g form factor. Built with a continuous 160C discharge rating, it supplies steady voltage under continuous throttle draw, allowing pilots to capture smooth HD video lines or enjoy long cruise sessions without sudden low-voltage warnings. Enclosed in a compact 62 × 31 × 23 mm softcase, it features a gold-plated XT30 main connector and JST-XHR-4P balance wire. Sold in a value 2-pack for extended field flying.

Key Advantages

• Expanded 9.44Wh Capacity Reserve: 850mAh volume gives 3" ducted cinewhoops and 3" cruisers the airtime needed for complex filming passes.

• Sub-100g Lightweight Build (77g): Helps keep total quad weight well under critical threshold limits while improving stick time.

• 160C Continuous Discharge: Holds firm voltage curves under continuous duct drag and full-throttle punch-outs carrying HD camera gear.

• Heavy-Duty XT30 Main Plug: Low-resistance connector prevents thermal throttle loss during sustained high-amperage flights.

• Standard JST-XHR-4P Connector: Plug-and-play balance connection for precise cell management.

Primary Applications & Compatibility

Specifically designed for 11.1V (3S) FPV power systems requiring an XT30 main plug and battery mounting straps accommodating a 62 × 31 × 23 mm footprint:

• 3" Ducted Cinewhoops & 3" Light Toothpick Cruisers: Native match for 3S filming and cruise platforms (e.g., GEPRC CineLog30 3S, iFlight ProTek25/30 3S, DarwinFPV BabyApe II 3S, and custom 3" carbon builds running 1404–1507 3S motors carrying Naked GoPro or DJI O3 Air Units).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 11.1V / 3S1P / 3 Cells

• Capacity: 850mAh

• Energy Rating: 9.44Wh (per pack)

• Discharge Rate: 160C

• Net Weight (±20g): 77g / 0.17 lbs

• Dimensions (±3mm): 62 x 31 x 23 mm / 2.44 x 1.22 x 0.91 inches (L x W x H)

• Connector Type: XT30 Plug

• Balance Connector: JST-XHR-4P

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 11.1V 850mAh 160C 3S LiPo Batteries (XT30 Plug)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, flight controller, and PDB support 11.1V (3S) input and use an XT30 connector.

• Connector Connection: Push the XT30 plug firmly into your quad harness lead until fully engaged.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 3S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Warning: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.