2-Pack OVONIC 22.2V 6S 1350mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 5" to 6" FPV Freestyle Drones

Overview

Finding the exact sweet spot between aggressive throttle response and long flight time is the holy grail for 5-inch and 6-inch FPV pilots. Too heavy, and your quad feels sluggish; too small, and voltage sags mid-line.

The OVONIC 6S 1350mAh 180C LiPo battery represents the gold-standard power choice for classic 5-inch and 6-inch FPV freestyle builds. Built with a continuous 180C discharge rating, it sustains intense current demands without voltage dips during power loops, dives, and full-throttle punch-outs. Encased in a crash-resistant softcase with an internal U-shaped protective impact armor plate, an anti-slip XT60-L locking plug, and a balance lead storage slot, this pack delivers structural resilience and ideal weight distribution. Sold as a value 2-pack to maximize your stick time.

Key Advantages

• The 5"-6" Gold Standard Balance: Weighing 228g, it offers the optimal ratio of high-current discharge to capacity for balanced center-of-gravity handling on 5" and 6" rigs.

• 180C Continuous Burst Output: Low internal resistance cell chemistry eliminates voltage sag when pulling out of steep dives or holding sustained full-throttle lines.

• Internal U-Shaped Protective Impact Armor Plate: Embedded impact shield surrounds internal cell ends, protecting against structural collapse during high-speed Bando crashes.

• XT60-L Locking Plug & Insulating Cap: Anti-slip locking ridge keeps battery connections rock-solid during high-G flight, while the insulating end-cap guards terminals from metal debris and shorts.

• Integrated Balance Lead Storage Slot: Molded side slot holds the balance connector flush against the battery wall, eliminating dangles and prop strikes.

Primary Applications & Compatibility

Engineered for 22.2V (6S) FPV power systems requiring an XT60/XT60-L main plug and battery trays accommodating a 79 × 40 × 43 mm footprint:

• 5" to 6" FPV Freestyle & Bando Quadcopters: Perfect match for mainstream 5-inch and 6-inch freestyle setups (e.g., GEPRC Mark5 / Mark5 DC, iFlight Nazgul Evoque F5/F6, ImpulseRC Apex EVO, and custom 5"/6" carbon frames with 2207–2407 motors).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: Integrated U-shaped impact plate

• Capacity: 1350mAh

• Energy Rating: 29.97Wh (per pack)

• Discharge Rate: 180C

• Net Weight (±20g): 228g / 0.50 lbs

• Dimensions (±3mm): 79 x 40 x 43 mm / 3.11 x 1.57 x 1.69 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 1350mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, motor KV, and PDB support 22.2V (6S) input and use an XT60/XT60-L main lead.

• Connector Engagement: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a shake-proof connection.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.