2-Pack OVONIC 14.8V 4S 850mAh 160C LiPo Battery with XT30 for 3" Ducted Cinewhoops & 3.5" Micro Cruisers

Overview

Flying 3-inch ducted cinewhoops carrying HD cameras (GoPro Hero / DJI O3 Air Unit) requires an extra reserve of capacity to sustain heavy continuous throttle draw without causing thermal stress or sudden voltage brownout.

The OVONIC 14.8V 4S 850mAh 160C LiPo battery provides heavy-duty capacity in a sub-100g (98g) form factor. Engineered with 160C continuous discharge performance, it supplies steady voltage under heavy payload drag, allowing pilots to capture smooth, cinematic video lines. Built in a compact 62 × 31 × 30 mm softcase, it features a gold-plated XT30 connector and JST-XHR-5P balance wire. Sold in a 2-pack for extended field filming.

Key Advantages

• Sub-100g Payload Weight: Weighing only 98g, it helps keep total quad weight under critical threshold limits while expanding flight endurance.

• 160C High-Burst Amperage: Holds rock-solid voltage curves under continuous duct drag and full-throttle climbs carrying HD cameras.

• Expanded Capacity Reserve: 850mAh volume gives 3" cinewhoops and 3.5" micro cruisers the extra airtime needed for complex filming passes.

• Heavy-Duty XT30 Main Plug: Low-resistance connector prevents plug melting and current throttling during sustained high-amp flights.

• Standard JST-XHR-5P Connector: Plug-and-play balance charging for precise individual cell balancing.

Primary Applications & Compatibility

Designed specifically for 14.8V (4S) FPV power systems requiring an XT30 main plug and battery mounting straps accommodating a 62 × 31 × 30 mm footprint:

• 3" Performance Cinewhoops & 3.5" Micro Long-Range Rigs: Perfect match for camera quads (e.g., GEPRC CineLog30, iFlight Protek35 4S, Flywoo Explorer LR 4S, and custom 3" to 3.5" carbon builds running 1404–1507 motors carrying HD action cams).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 14.8V / 4S1P / 4 Cells

• Capacity: 850mAh

• Energy Rating: 12.58Wh (per pack)

• Discharge Rate: 160C

• Net Weight (±20g): 98g / 0.22 lbs

• Dimensions (±3mm): 62 x 31 x 30 mm / 2.44 x 1.22 x 1.18 inches (L x W x H)

• Connector Type: XT30 Plug

• Balance Connector: JST-XHR-5P

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 14.8V 850mAh 160C 4S LiPo Batteries (XT30 Plug)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, flight controller, and PDB support 14.8V (4S) input and use an XT30 connector.

• Connector Connection: Push the XT30 plug firmly into place to maintain solid contact during high-G flight maneuvers.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 4S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Warning: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.