2-Pack OVONIC 22.2V 6S 1750mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 7" FPV Mountain Surfing & Long-Range Drones

Overview

Scaling high mountain peaks, diving deep alpine valleys, and pushing long-distance GPS missions on heavy 7-inch quadcopters requires maximum Wh energy reserves combined with high continuous amperage output.

The OVONIC 6S 1750mAh 180C LiPo battery is the ultimate high-capacity powerhouse engineered for 7-inch long-range and heavy-payload FPV quadcopters. Delivering a massive 38.85Wh of energy at 273g, it supplies steady high-amperage power to large-stator motors without voltage collapse during high-altitude climbs or headwind punch-throughs. Equipped with an internal U-shaped protective impact armor plate, an anti-slip XT60-L locking plug, an insulating safety cap, and an integrated balance lead storage slot, this pack provides long-distance reliability and maximum airtime. Sold as a value 2-pack for extended long-range sorties.

Key Advantages

• Massive 38.85Wh Energy Reserve: Maximum capacity volume engineered for extended long-range sorties, mountain surfing, and heavy 7-inch builds.

• 180C Unyielding Amperage Output: Holds solid voltage under high motor load, preventing brownouts during wind punch-through and long pitch climbs.

• Internal U-Shaped Protective Impact Armor Plate: Embedded armor shield guards internal cell ends against severe impact forces during field landings.

• Bando-Ready XT60-L Locking Plug: Anti-slip tab locks high-current power leads securely under heavy motor torque and frame vibration.

• Integrated Balance Lead Storage Slot: Keeps the balance plug secured flush against the side wall to prevent loose wires from reaching prop arcs.

Primary Applications & Compatibility

Specifically designed for 22.2V (6S) FPV power systems requiring an XT60/XT60-L main plug and battery mounting straps accommodating an 80 × 41 × 52 mm footprint:

• 7" Heavy FPV Long-Range & Mountain Surfing Drones: Engineered for 7-inch quadcopters (e.g., iFlight Chimera7 Pro V2, GEPRC Crocodile7, Flywoo Explorer LR 7, and custom 7" carbon fiber rigs running 2807–2810 motors) carrying full-size action cameras and GPS payloads.

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: Integrated U-shaped impact plate

• Capacity: 1750mAh

• Energy Rating: 38.85Wh (per pack)

• Discharge Rate: 180C

• Net Weight (±20g): 273g / 0.60 lbs

• Dimensions (±3mm): 80 x 41 x 52 mm / 3.15 x 1.61 x 2.05 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 1750mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, motor KV, and PDB support 22.2V (6S) input and feature an XT60/XT60-L main lead.

• Connector Connection: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a shake-proof connection.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.