2-Pack OVONIC 22.2V 6S 2200mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 7" to 8" FPV Cinematic & Heavy-Lift Drones

Overview

Powering heavy 7-inch to 8-inch cinema quadcopters and multi-rotor rigs carrying high-value camera gear demands maximum continuous energy density, superior thermal dissipation, and optimal weight distribution along the frame axis.

The OVONIC 6S 2200mAh 180C LiPo battery is the pinnacle high-capacity energy source engineered for 7-inch to 8-inch FPV cinematic lifters and heavy long-range quadcopters. Delivering an immense 48.84Wh of energy at 335g, its extended 111mm length profile allows for clean center-of-gravity placement along long carbon top plates. Delivering 180C burst discharge, it sustains smooth, unyielding voltage output during heavy-lift climbs and long-distance cruises. Built with an internal U-shaped protective impact armor plate, an anti-slip XT60-L locking plug with an insulating cap, and an integrated balance lead storage slot, this pack offers commercial-grade flight performance. Sold as a value 2-pack for heavy field production.

Key Advantages

• Pinnacle 48.84Wh Energy Capacity: 2200mAh volume delivers top-tier flight endurance for 7" and 8" cinema lifters and heavy GPS long-range platforms.

• Extended Center-of-Gravity Profile: Long 111mm body layout improves weight distribution along carbon top plates on large 7"-8" frames.

• 180C High-Amperage Architecture: Low internal resistance cell chemistry holds solid voltage under continuous heavy motor load, eliminating thermal throttle drop.

• Internal U-Shaped Protective Armor Plate: Embedded armor shield guards internal cell ends against structural deformation during field landings.

• XT60-L Anti-Slip Locking Plug: High-current locking connection keeps power leads locked tight under heavy motor torque and frame vibration.

• Integrated Balance Lead Storage Slot: Holds the balance plug securely flush against the side wall, keeping loose wires safely out of spinning prop arcs.

Primary Applications & Compatibility

Specifically designed for 22.2V (6S) FPV power systems requiring an XT60/XT60-L main plug and battery mounting straps accommodating a 111 × 36 × 46 mm long footprint:

• 7" to 8" FPV Cinema Lifters & Heavy Long-Range Drones: Engineered for large 7-inch and 8-inch quadcopters, X8 rigs, and cinematic lifters (e.g., iFlight Chimera7 Pro V2, Taurus X8, GEPRC Crocodile7, and custom 8" long-range builds running 2807–3110 motors carrying professional action cameras or micro cinema payloads).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: Integrated U-shaped impact plate

• Capacity: 2200mAh

• Energy Rating: 48.84Wh (per pack)

• Discharge Rate: 180C

• Net Weight (±20g): 335g / 0.74 lbs

• Dimensions (±3mm): 111 x 36 x 46 mm / 4.37 x 1.42 x 1.81 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 2200mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, motor KV, and PDB support 22.2V (6S) input and feature an XT60/XT60-L main lead.

• Connector Connection: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a shake-proof connection.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.