OVONIC 22.2V 7000mAh 130C 6S Softcase LiPo Battery Pack with EC5 Connector for 1/8 Scale RC Cars, EDF Jets, Boats, and Heavy-Lift Multirotors

Overview

High-demand 1/8 scale RC bashers, speed-run platforms, high-thrust EDF jets, and commercial multirotors demand substantial energy reserves and high continuous discharge currents to prevent thermal overload and power starvation. Running undersized battery packs often leads to severe voltage sag, reduced top speeds, and truncated operational sessions.

OVONIC 22.2V 7000mAh 130C 6S Softcase LiPo Battery Pack is engineered to deliver high energy density combined with high-amperage output for power-hungry RC platforms. Delivering a manufacturer-rated 130C continuous discharge rate (260C burst) and a massive 7000mAh capacity (155.4Wh), this 6S pack provides stable voltage maintenance under heavy load during full-throttle acceleration, off-road bashing, and long-range aerial missions. Constructed in a compact softcase profile with a factory-installed EC5 connector and heavy-duty leads, it serves as a reliable power source for demanding 6S electronics.

Primary Applications & Compatibility

Requires a 6S (22.2V) power setup using EC5 plugs and a battery tray measuring at least 155 × 45 × 54 mm:

• 1/8 Scale RC Monster Trucks, Buggies & Truggies: Fits 6S-capable surface models including the ARRMA Kraton 6S BLX, Typhon 6S, Talion 6S, Losi 8IGHT series, and other 1/8 scale RC platforms.

• High-Thrust 6S EDF Jets & Scale Aircraft: Ideal for 80mm–90mm EDF jets, aerobatic planes, and large scale aircraft requiring sustained continuous current and extended flight times.

• RC Powerboats & Marine Platforms: Delivers high burst discharge for fast hole-shots, smooth high-speed cruising, and sustained high-RPM motor performance.

• Heavy-Lift Multirotors & Long-Range Rigs: Provides high capacity for cinematic drone rigs, aerial mapping multirotors, and large FPV setups requiring 22.2V power.

Key Features

• 130C Continuous Discharge Rate: High-amperage output (260C peak burst) reduces voltage sag during rapid acceleration and heavy torque demands.

• 7000mAh Capacity Reserve: Offers maximum energy storage (155.4Wh) per charge cycle for longer driving, flying, and boating sessions.

• Factory-Fitted EC5 Plug: Equipped with gold-plated EC5 main connectors and heavy-gauge silicone wire for efficient, low-resistance power distribution.

• Compact Softcase Construction: Measures 155 × 45 × 54 mm with a weight of 799g, delivering a balanced power-to-weight ratio for large-scale models.

• JST-XHR-7P Balance Port: Standard 7-pin balance lead allows precise cell-by-cell monitoring and maintenance on LiPo balance chargers.

Specification

• Brand: OVONIC

• Battery Type: Lithium Polymer (LiPo)

• Cell Configuration: 22.2V / 6S1P / 6 Cells

• Capacity: 7000mAh

• Nominal Voltage: 22.2V

• Discharge Rate: 130C Continuous (260C Peak Burst)

• Total Energy: 155.4Wh

• Main Connector Type: EC5 Plug

• Balance Connector: JST-XHR-7P

• Case Type: Softcase

• Dimensions: 155 × 45 × 54 mm (±5mm variance) | 6.10 × 1.77 × 2.13 in

• Net Weight: 799 g (±20g variance) | 1.76 lbs

• Package Quantity: 1-Pack

What's in the Box

• 1 × OVONIC 22.2V 7000mAh 130C 6S Softcase LiPo Battery with EC5 Plug

• 2 × OVONIC Brand Stickers

• 1 × User Manual

Safety & Operating Guidelines

• Tray & Voltage Check: Verify that your ESC and motor are rated for 22.2V (6S) input, feature an EC5 connector, and accommodate battery tray dimensions of 155 × 45 × 54 mm.

• Charging Instructions: Charge exclusively using a dedicated LiPo balance charger set to 6S balance mode. Cease charging immediately once each cell reaches 4.20V. Never leave charging batteries unattended.

• Low-Voltage Protection: Configure your ESC low-voltage cutoff (LVC) to at least 3.4V or 3.5V per cell. Do not permit cell voltage to drop below 3.20V under load.

• Softcase Inspection: Inspect the battery surface before every run to ensure there are no punctures, tears, or swelling from chassis impacts.

• Storage Maintenance: For storage periods exceeding 48 hours, store batteries at 3.80V to 3.85V per cell in a cool, dry location inside a fire-retardant LiPo bag.