2-Pack OVONIC 22.2V 6S 1050mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 5" to 6" FPV Freestyle & Bando Drones

Overview

Shredding concrete Bando spots and throwing down aggressive 5-inch to 6-inch freestyle lines demands relentless throttle punch, crash-proof connections, and robust capacity to handle heavy HD action cameras without lagging mid-flight.

The OVONIC 6S 1050mAh 180C LiPo battery is purpose-built for high-intensity 5-inch and 6-inch FPV freestyle and Bando quadcopters. Delivering a true 180C continuous discharge rate, it holds rock-solid voltage through heavy power-loops, rapid dive recoveries, and high-RPM throttle pops. Engineered for extreme durability, it features an integrated U-shaped 3S protective armor plate inside the softcase, shielding internal cell ends against severe impact damage during high-speed Bando crashes. Equipped with an anti-slip XT60-L locking plug, a protective insulating cap, and a built-in balance lead storage slot, this pack protects your wiring harness against prop strikes, debris, and accidental unplugging. Sold as a value 2-pack so you can keep pushing your limits session after session.

Key Advantages

• 180C Raw Punch for Freestyle: Advanced cell chemistry delivers zero-sag power output, giving you instant throttle authority during dive recoveries and aggressive trick transitions.

• Internal U-Shaped 3S Protective Armor Plate: Built-in impact-resistant U-shaped plate surrounds vulnerable cell corners, absorbing hard landing forces and protecting against severe battery deformation during concrete Bando crashes.

• Bando-Ready XT60-L Plug & Safety Cap: The anti-slip locking ridge keeps your power lead locked tight during high-G impacts, while the insulating end-cap protects solder terminals against short circuits, concrete dust, and moisture in harsh environments.

• Integrated Balance Lead Storage Slot: Moulded wire management slot tucks the balance connector neatly against the battery body, eliminating loose wires and preventing prop strikes.

• Optimized 5"-6" Weight Balance: Weighing 186g (±5g) per pack, it provides the ideal balance of flight endurance and agile center-of-gravity handling for heavy camera-equipped freestyle rigs.

Primary Applications & Compatibility

Specifically designed for 22.2V (6S) FPV power systems using an XT60/XT60-L main plug and battery mounting straps accommodating a 79 × 40 × 35 mm footprint:

• 5" to 6" FPV Freestyle & Bando Quadcopters: High-current match for aggressive 5-inch and 6-inch freestyle frames (such as the GEPRC Mark5, iFlight Nazgul Evoque F5, ImpulseRC Apex EVO 5", and custom 6" long-range freestyle builds running high-KV 6S motors) carrying full-size action cameras (GoPro Hero / DJI Action).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: U-Shaped 3S Protective Armor Plate

• Capacity: 1050mAh

• Discharge Rate: 180C

• Net Weight (±20g): 186g / 0.41 lbs

• Dimensions (±3mm): 79 x 40 x 35 mm / 3.11 x 1.57 x 1.38 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 1050mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, motor KV, and PDB support 22.2V (6S) input and feature an XT60/XT60-L main lead.

• Connector Connection: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a shake-proof connection.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V. Never leave charging batteries unattended.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: For storage periods longer than 48 hours, store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place.