2-Pack OVONIC 22.2V 6S 1800mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 7" FPV Mountain Surfing Drones

Overview

Scaling high mountain peaks, punching through fierce high-altitude winds, and exploring remote ridge lines demands maximum Wh energy capacity paired with unyielding burst discharge.

The OVONIC 6S 1800mAh 180C LiPo battery is a high-capacity powerhouse built for 7-inch FPV mountain surfing and big-bore exploration quadcopters. Packing nearly 40Wh (39.96Wh) of energy at 280g, it supplies continuous high-current power for large 2807–2810 motors without voltage collapse when fighting strong headwinds or pulling long vertical ascents. Features an internal U-shaped protective impact armor plate inside the softcase, an anti-slip XT60-L locking plug, an insulating safety cap, and a built-in balance lead storage slot to protect your harness during rugged mountain landings. Sold as a value 2-pack for extended alpine sorties.

Key Advantages

• High-Capacity 39.96Wh Energy Buffer: 1800mAh capacity volume unlocks maximum flight endurance for 7" long-range exploration rigs and mountain surfers.

• 180C High-Wind Punch-Through Power: Low internal resistance cell chemistry holds rock-solid voltage curves under sustained pitch climbs and heavy motor current loads.

• Internal U-Shaped Protective Armor Plate: Embedded armor shield protects cell corners against structural deformation from hard landings on rocky terrain.

• XT60-L Anti-Slip Locking Plug: High-current locking connection keeps power leads securely mated under intense motor draw and frame vibration.

• Integrated Balance Lead Storage Slot: Holds the balance plug flush against the side wall, keeping loose wires safely out of spinning prop arcs.

Primary Applications & Compatibility

Specifically designed for 22.2V (6S) FPV power systems requiring an XT60/XT60-L main plug and battery mounting straps accommodating a 78 × 39 × 51 mm footprint:

• 7" Heavy FPV Long-Range & Mountain Surfing Drones: Tuned for 7-inch quadcopters (e.g., iFlight Chimera7 Pro V2, GEPRC Crocodile7, Flywoo Explorer LR 7, and custom 7" carbon fiber rigs carrying full-size GoPro Hero or DJI Action cameras).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: Integrated U-shaped impact plate

• Capacity: 1800mAh

• Energy Rating: 39.96Wh (per pack)

• Discharge Rate: 180C

• Net Weight (±20g): 280g / 0.62 lbs

• Dimensions (±3mm): 78 x 39 x 51 mm / 3.07 x 1.54 x 2.01 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 1800mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, motor KV, and PDB support 22.2V (6S) input and feature an XT60/XT60-L main lead.

• Connector Connection: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a shake-proof connection.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.