2×Ovonic 2S Lipo Battery Pack 1000mAh 50C 7.4V with JST Plug for RC helicopter RC Aircraft Brushless Quadcopter

Ovonic has gradually been recognized by RC hobbyists and has been highly recommended because of its excellent performance and cost-effectiveness. Ovonic lipo batteries are widely used for RC cars, RC airplanes, RC helicopters, RC boats and etc. The Ovonic 50C 7.4V 1000mAh RC battery is great for RC helicopters, RC airplanes, RC cars, etc.
Ovonic 1000mAh 2S lipo brings the best balance of handling and performance to your RC airplane. Whether you want standing back flips or amazing drift, this RC lipo battery gives you enough power and great punch to perfectly complete.

More Choice for You:

If your aircraft is small, we also have 450mAh 2s 50c with JST for small planes. Besides, lipo 1500mAh 2s 50C with JST is also available for RC planes.
Check more lipo batteries for RC aircraft.

Spec of OVONIC 2S 1000mAh 50C:

• Brand: Ovonic
• Chemistry: Li-polymer
• Cell Number: 2S
• Voltage(V): 7.4V
• Capacity(mAh): 1000mAh
• Discharge Rate: 50C
• Charge Plug: JST-XH
• Discharge Plug: JST Connector
• Net Weight(dev.20g): 114g (57g for one pack)
• Length(dev.5mm):71mm
• Width(dev.2mm):35mm
• Height(dev.2mm):12mm

Compatible With:

Ovonic 2S 7.4V 1000mAh Lipo Battery especially for E-flite Fokker DVII 250, Nieuport 17 250, and Blade 200 QX, WLtoys V912 & V915, Warbirds FMS 800mm and X520 FPV VTOL 520MM (20.4") Wingspan - RTF, etc.

Package Content

• 2×Ovonic 2S LiPo Battery Pack 1000mAh 50C 7.4V with JST Plug
• 1×User Manual

Kindly Note:

• All batteries are available Ready-to-Run, Please select the right connector according to your original battery.
• At the same time, please kindly compare the dimension with your original battery.
• If you have any other special demands or problems, please feel free to contact us.

Please Notice:

1. For the RC battery, only if the voltage and the plug match, then it will fit.
2. Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
3. To double make sure of safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
4. If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.