OVONIC 11.1V 5000mAh 3S 50C LiPo Battery Pack with XT60 Plug for 1/10 monster truck crawler

Ovonic sells high-quality and long-life lipo batteries for RC car/plane/FPV/Heli and more RC hobbies. Ampow is dedicated to providing a better flight or driving experience with a favorable price And provides fast order shipping and friendly service for our customers.
5000mAh 3S 50C lipo battery is designed for most 1/10 monster trucks, crawlers, etc. Some customers also used it on their planes.

More Choice for You:

If you want a longer 5000mah 3s lipo, you also can find 3S 5000mAh 50C with XT60 & Trx Plug for Slash/E-Revo/UDR/X-Maxx and more 3s lipo batteries here.

Spec of 5000mah 3s lipo battery:

- Brand: Ovonic
- Chemistry: Li-polymer
- Capacity: 5000mAh
- Voltage: 11.1V
- Cell Number: 3S1P
- Discharge Rate : 50C
- Max Burst Discharge Rate: 100C
- Charge Plug: JST-XH
- Discharge Plug: XT60 Plug
- Net Weight (dev.20g) : 348g
- Length (dev.5mm) : 138mm
- Width (dev.2mm) : 42mm
- Height (dev.2mm) : 28mm

Compatible with:

Ovonic 3s 5000mah provides high quality, reliable power for Traxxas models 1/10 scale vehicles or larger, Traxxas RC Cars, Slash VXL, Slash 4x4 VXL, E-Maxx Brushless, E-Revo Brushless, and Spartan models, RC Airplane/Helicopter, RC Truck multirotor, Boat and Truck. (Only if the voltage, dimension, and the plug match, then it will fit).

Kindly Note:

* All batteries available Ready-to-run, Please select the right connector according to your original battery.
* At the same time, please kindly compare the dimension with your original battery.
* If you have any other special demands or problems, please feel free to contact us.

Package Content

- 1 x Ovonic 3S1P 11.1V 5000mAh 50C with XT60 Plug LiPo Battery Pack
- 1 x User Manual

Please Notice:

1. For the RC battery, only if the voltage and the plug match, then it will fit.
2. Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
3. To double make sure of safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
4. If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.