2-Pack OVONIC 22.2V 6S 1150mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 5" to 6" FPV Freestyle & Bando Drones

Overview

Carrying full-size action cameras on heavy 5-inch and 6-inch quadcopters quickly drains standard capacity batteries, forcing pilots to cut flight lines short to prevent voltage brownouts.

The OVONIC 6S 1150mAh 180C LiPo battery gives you the extra capacity reserve needed for longer, uninterrupted freestyle flights. Engineered with continuous 180C high-amperage output, it maintains rock-solid voltage stability under heavy continuous throttle loads. Equipped with an internal U-shaped protective impact plate inside the softcase, an anti-slip XT60-L locking plug, an insulating safety cap, and a built-in balance lead storage slot, this pack delivers extended airtime without sacrificing structural durability or power delivery. Sold in a 2-pack to maximize your field endurance.

Key Advantages

• Extended Capacity Reserve: 1150mAh volume extends flight duration on heavy 5" and 6" setups carrying full-sized GoPro HD cameras.

• Zero Voltage Brownout under Load: 180C discharge rate prevents late-flight voltage sag, allowing confident throttle recoveries even when capacity is low.

• Internal U-Shaped Impact Protection: Embedded internal plate shields battery core against hard landing impacts and structural warping.

• Bando-Ready XT60-L Plug & Safety Cap: Anti-slip locking mechanism keeps high-current connections solid during intense vibrations, with an insulating cap protecting soldered leads.

• Integrated Balance Lead Storage Slot: Keeps balance connector locked flush against the pack, preventing loose wire snagging during flight.

Primary Applications & Compatibility

Specifically designed for 22.2V (6S) FPV power systems using an XT60/XT60-L main plug and battery mounting straps accommodating a 79 × 40 × 37 mm footprint:

• 5" to 6" Extended Freestyle & Long-Range Cruisers: Extended flight match for heavy 5-inch and 6-inch FPV quadcopters (GEPRC Mark5, iFlight Nazgul Evoque F5/F6, ImpulseRC Apex EVO 5", and custom 6" long-range freestyle rigs running high-power 2207–2506 6S motors).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: Integrated U-shaped impact plate

• Capacity: 1150mAh

• Discharge Rate: 180C

• Net Weight (±20g): 198g / 0.44 lbs

• Dimensions (±3mm): 79 x 40 x 37 mm / 3.11 x 1.57 x 1.46 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 1150mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, motor KV, and PDB support 22.2V (6S) input and feature an XT60/XT60-L main lead.

• Connector Connection: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a shake-proof connection.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.