2-Pack OVONIC 22.2V 6S 1550mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 5" to 7" FPV Racing & Cinematic Drones

Overview

High-power FPV track racing with aggressive motor setups and high-speed cinematic filming both demand relentless voltage stability and generous capacity reserves to eliminate late-lap power fade.

The OVONIC 6S 1550mAh 180C LiPo battery provides heavy-duty capacity and continuous high-amperage output for demanding 5-inch to 7-inch FPV racing quadcopters, freestyle rigs, and HD camera platforms. Delivering 34.41Wh of energy at 255g, it allows track racers to hold full-throttle lines through high-speed gates and long straightaways without voltage brownout before crossing the finish line. Built with an internal U-shaped protective impact armor plate inside the softcase, an anti-slip XT60-L locking plug, an insulating safety cap, and a molded balance lead storage slot, this pack withstands high-speed gate clips and hard field impacts. Sold as a value 2-pack for high-intensity flying sessions.

Key Advantages

• High-Power Track Racing & Filming Capacity (34.41Wh): 1550mAh capacity reserve powers high-KV motor setups, counteracting late-lap voltage fade in competitive racing and payload drag on HD camera quads.

• 180C Sustained Amperage Architecture: Low internal resistance cell chemistry prevents voltage sag during prolonged straightaway pulls and altitude climbs.

• Internal U-Shaped Protective Impact Armor Plate: Embedded armor shield protects cell corners against structural collapse during high-speed track crashes and hard landings.

• XT60-L Anti-Slip Locking Plug: High-current locking connection prevents power leads from pulling apart under heavy motor torque and vibration, while the insulating end-cap guards terminals from short circuits.

• Integrated Balance Lead Storage Slot: Holds the balance plug securely flush against the side wall, keeping loose wires safely out of spinning prop arcs.

Primary Applications & Compatibility

Engineered for 22.2V (6S) FPV power systems requiring an XT60/XT60-L main plug and battery mounting trays accommodating a 79 × 40 × 47.5 mm footprint:

• 5" to 7" FPV Racing, Cinematic & Long-Range Quads: High-current match for aggressive race setups and camera quads (e.g., Five33 Spec-Grabber, GEPRC Mark5 Race/HD, iFlight Nazgul Evoque F5/F6, Chimera7 Pro V2, and custom 6S carbon fiber racing and cinematic frames running 2207–2807 motors).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: Integrated U-shaped impact plate

• Capacity: 1550mAh

• Energy Rating: 34.41Wh (per pack)

• Discharge Rate: 180C

• Net Weight (±20g): 255g / 0.56 lbs

• Dimensions (±3mm): 79 x 40 x 47.5 mm / 3.11 x 1.57 x 1.87 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 1550mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, motor KV, and PDB support 22.2V (6S) input and feature an XT60/XT60-L main lead.

• Connector Connection: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a vibration-proof connection during high-G maneuvers.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.