2-Pack OVONIC 22.2V 6S 1680mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 6" to 7" FPV Freestyle & Long-Range Drones

Overview

Balancing high-amperage output with extended airtime on performance 6-inch and 7-inch FPV drones requires a battery pack that steps up capacity without adding unmanageable weight.

The OVONIC 6S 1680mAh 180C LiPo battery provides an expanded 37.30Wh energy reserve designed for high-endurance 6-inch and 7-inch FPV quadcopters. Weighing 258g, it delivers a high power-to-weight ratio that maintains agile roll authority while eliminating premature voltage sag. Built for demanding field conditions, it features an internal U-shaped protective impact armor plate to guard cell ends, an anti-slip XT60-L locking plug with an insulating cap, and an integrated balance lead storage slot to eliminate prop strikes. Sold as a value 2-pack for high-productivity flight days.

Key Advantages

• Extended 37.30Wh Energy Capacity: 1680mAh volume provides a sweet-spot capacity upgrade over standard 1550mAh packs for longer freestyle sessions and mid-range cruising.

• 180C Continuous Burst Delivery: Low internal resistance cell chemistry holds firm voltage through sustained high-throttle climbs and dive recoveries.

• Internal U-Shaped Protective Armor Plate: Embedded armor shield protects vulnerable internal cell corners against structural deformation from hard landings.

• XT60-L Locking Plug & Safety Cap: Anti-slip tab locks power connections tight against motor vibration, while the insulating end-cap protects solder terminals from moisture and metal dust.

• Integrated Balance Lead Storage Slot: Secures the balance connector flush against the battery wall, keeping loose wires safely away from spinning props.

Primary Applications & Compatibility

Specifically engineered for 22.2V (6S) FPV power systems requiring an XT60/XT60-L main plug and battery mounting trays accommodating a 78 × 39 × 48 mm footprint:

• 6" to 7" FPV Freestyle & Long-Range Cruisers: Ideal capacity match for performance builds (such as the GEPRC Crocodile7, iFlight Chimera7 Pro V2, Flywoo Explorer LR 6, and custom 6" to 7" carbon fiber frames running 2506–2807 motors).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: Integrated U-shaped impact plate

• Capacity: 1680mAh

• Energy Rating: 37.30Wh (per pack)

• Discharge Rate: 180C

• Net Weight (±20g): 258g / 0.57 lbs

• Dimensions (±3mm): 78 x 39 x 48 mm / 3.07 x 1.54 x 1.89 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 1680mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, motor KV, and PDB support 22.2V (6S) input and feature an XT60/XT60-L main lead.

• Connector Connection: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a vibration-proof connection.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.