2-Pack OVONIC 22.2V 6S 2000mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 7" to 8" FPV Heavy-Payload Drones

Overview

Carrying cinema-grade payload packages or launching extreme-distance GPS missions on heavy 7-inch and 8-inch FPV drones requires a massive power reservoir that maintains stable voltage under continuous heavy loading.

The OVONIC 6S 2000mAh 180C LiPo battery is a heavy-duty energy beast engineered for 7-inch to 8-inch FPV quadcopters carrying heavy camera equipment or long-distance payloads. Delivering a massive 44.40Wh of energy at 310g, it provides continuous high-amperage output to large-stator motors without voltage sag late in the flight. Built with an internal U-shaped protective impact armor plate to absorb impact forces, an anti-slip XT60-L locking plug with an insulating cap, and an integrated balance lead storage slot, this pack delivers long-distance reliability and crash resilience. Sold in a value 2-pack for high-productivity commercial and long-range missions.

Key Advantages

• Massive 44.40Wh Energy Reservoir: 2000mAh capacity rating provides maximum airtime for heavy-payload 7" and 8" quadcopters.

• 180C Heavy-Amperage Architecture: Low internal resistance prevents motor power fade and voltage brownout during long high-throttle cruises.

• Internal U-Shaped Impact Armor Plate: Embedded internal armor shields cell corners against impact damage and structural deformation during field landings.

• XT60-L Anti-Slip Locking Plug: High-current locking connection keeps power leads locked tight under intense motor draw and frame vibration.

• Integrated Balance Lead Storage Slot: Holds the balance plug flush against the side wall, keeping loose wires safely out of spinning prop arcs.

Primary Applications & Compatibility

Specifically designed for 22.2V (6S) FPV power systems requiring an XT60/XT60-L main plug and battery mounting straps accommodating a 78 × 39 × 56 mm footprint:

• 7" to 8" FPV Heavy-Payload & Long-Range Quadcopters: Built for heavy 7-inch and 8-inch builds (e.g., iFlight Chimera7 Pro V2, GEPRC Crocodile7, custom 8" long-range rigs, and heavy-payload filming platforms carrying full-size GoPro Hero / DJI Action setups).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: Integrated U-shaped impact plate

• Capacity: 2000mAh

• Energy Rating: 44.40Wh (per pack)

• Discharge Rate: 180C

• Net Weight (±20g): 310g / 0.68 lbs

• Dimensions (±3mm): 78 x 39 x 56 mm / 3.07 x 1.54 x 2.20 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 2000mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your ESC, motor KV, and PDB support 22.2V (6S) input and feature an XT60/XT60-L main lead.

• Connector Connection: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a shake-proof connection.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.