2-Pack OVONIC 22.2V 6S 1480mAh 180C LiPo Battery with XT60-L Locking Plug & Balance Lead Storage Slot for 5" to 7" FPV Racing Drones

Overview

Competitive track racing demands maximum punch through high-speed gates, zero voltage sag on full-throttle straightaways, and enough energy reserve to maintain peak velocity across every lap.

The OVONIC 6S 1480mAh 180C LiPo battery is engineered specifically for high-power 5-inch to 7-inch FPV racing quadcopters. Delivering a true 180C continuous discharge rating, it supplies unyielding amperage to high-KV 6S motors without throttle drop during aggressive corner exits and straightaway sprints. Designed for intense track environments, it features an internal U-shaped protective armor plate inside the softcase to resist impact damage during high-speed gate clips and crashes. Equipped with an anti-slip XT60-L locking plug, an insulating safety cap, and a built-in balance lead storage slot, this pack delivers race-ready reliability. Sold as a value 2-pack for back-to-back heat swaps.

Key Advantages

• High-Amp 180C Track Performance: Low internal resistance cell architecture prevents power fade, ensuring sustained full-throttle output from the starting signal to the final lap.

• Full-Heat Capacity Reserve: 1480mAh / 32.86Wh energy capacity allows pilots to push high-amperage race setups without experiencing late-lap battery sag or brownouts.

• Internal U-Shaped Protective Impact Armor Plate: Guards internal cell corners against structural collapse during high-speed gate collisions and mid-air race mid-airs.

• Race-Proven XT60-L Locking Plug: Anti-slip ridge prevents power lead separation under extreme motor torque and severe cornering G-forces, while the insulating cap shields solder terminals.

• Integrated Balance Lead Storage Slot: Keeps the balance wire tucked flush against the battery wall, eliminating dangling wires and prop strikes during high-RPM laps.

Primary Applications & Compatibility

Engineered for 22.2V (6S) high-performance FPV racing power systems requiring an XT60/XT60-L main plug and battery mounting trays accommodating a 79 × 40 × 45 mm footprint:

• 5" to 7" FPV Race Quadcopters: Tailored match for high-KV 6S track rigs and open-class race builds (such as the Five33 Spec-Grabber, Mach 1 FPV race frames, iFlight Nazgul Evoque F5/F6 race variants, GEPRC Mark5 Race edition, and custom carbon fiber racing quads running 2207–2506 motors).

Technical Specifications

• Brand: Ovonic

• Chemistry: Lithium Polymer (LiPo)

• Configuration: 22.2V / 6S1P / 6 Cells

• Internal Protection: Integrated U-shaped impact plate

• Capacity: 1480mAh

• Energy Rating: 32.86Wh (per pack)

• Discharge Rate: 180C

• Net Weight (±20g): 243g / 0.54 lbs

• Dimensions (±3mm): 79 x 40 x 45 mm / 3.11 x 1.57 x 1.77 inches (L x W x H)

• Connector Type: XT60-L Plug with Insulating Cap

• Balance Connector: JST-XHR-7P (with Storage Slot)

• Packaging: Soft Case

What’s Included

• 2 × OVONIC 22.2V 1480mAh 180C 6S LiPo Batteries (XT60-L Plug with Insulating Cap)

• 2 × OVONIC Brand Decals

• 1 × User Manual & Safety Guide

Safety & Operating Recommendations

• System Check: Confirm your race ESC, motor KV, and PDB support 22.2V (6S) input and feature an XT60/XT60-L main lead.

• Connector Connection: Push the XT60-L plug firmly until the locking tab snaps into place to ensure a vibration-proof connection during high-G turns.

• Charging: Charge exclusively using a dedicated LiPo balance charger on 6S balance mode. Cease charging immediately when each cell reaches 4.20V.

• Low-Voltage Protection: Set flight controller low-voltage warnings to at least 3.5V per cell. Do not discharge below 3.20V under load.

• Storage Maintenance: Store batteries at 3.80V–3.85V per cell inside a fire-retardant LiPo bag in a cool, dry place when inactive over 48 hours.