Ovonic ROAM 22.8V 22000mAh 60C 6S1P LiHV Drone Battery Pack with XT90S-F Anti-Spark Connector for Industrial UAVs and Heavy-Lift Multirotors

Overview

Tired of battery overheating and severe voltage drops when your heavy-lift commercial drone fights strong headwinds? The Ovonic ROAM 22.8V 22000mAh 60C 6S LiHV battery pack is engineered to eliminate thermal puffing and mid-flight power sag. Featuring high-density high-voltage cells and an aggressive 60C continuous discharge rate, it supplies relentless torque and steady lift for industrial inspection platforms carrying high-end camera rigs and sensors. Built with advanced laser welding and dual internal aluminum plates, it keeps your commercial missions safe, cool, and running at peak efficiency.

Application

Optimized for high-reliability commercial UAV platforms requiring massive energy reserves and flat voltage profiles under continuous loads:

• Industrial Inspection Drones: Provides extended flight windows for power-hungry surveillance, LiDAR mapping, and infrastructure imaging rigs.

• Heavy-Lift Multirotors: Ideal for custom commercial hexacopters and octocopters that need high-amp power stability during long, steady hovering.

Key Features

• Advanced Aluminum Plate Cooling: Sandwiched with internal structural aluminum sheets and wrapped in a premium matte black thermal film to rapidly pull heat away from the cell core, preventing high-temperature swelling during summer missions.

• Laser-Welded Connectors: Cell terminals are joined using precise automated laser welding rather than traditional solder tabs, dropping internal resistance (IR) to zero out localized electrical hotspots.

• Anti-Spark XT90S-F Plug: Pre-soldered with an authentic yellow XT90S-F connector to eliminate harsh electrical arcs during connection, safeguarding your sensitive flight controllers and ESCs from voltage spikes.

• High-Voltage LiHV Platform: The 22.8V system maintains a higher voltage curve throughout the flight, ensuring your aircraft doesn't suffer from mushy throttle or sudden altitude drops near the end of the pack.

• Flush Dual-Side Wiring: Thick 8 AWG silicone power leads (150mm) and a JST-XHR-7P reverse balance lead (100mm) exit from opposing sides to streamline cable routing inside tight battery compartments and prevent wire pinches.

Technical Specifications

• Brand: Ovonic (ROAM Commercial Drone Series)

• Chemistry: High-Voltage Lithium Polymer (LiHV)

• Configuration: 22.8V / 6S1P / 6 Cells

• Capacity: 22000mAh (501.6WH)

• Discharge Rate: 60C Continuous

• Net Weight (±100g): 2328g / 5.13 lbs

• Dimensions (±2mm): 208 x 92.5 x 61.5 mm / 8.19 x 3.64 x 2.42 inches (L x W x H)

• Connector Type: XT90S-F Anti-Spark Plug

• Balance Connector: JST-XHR-7P Reverse Plug

• Wire Gauge: 8 AWG Power Wire / 22 AWG Balance Wire

• Pack Structure: Internal Aluminum Cooling Plates + External Matte Black PVC Shield

What's in the Box

• 1 x Ovonic ROAM 22.8V 22000mAh 60C 6S LiHV Battery Pack

• 1 x User Manual & Safety Guide

Charging & Safety Warnings

• LiHV Charge Settings: Your smart balance charger must be explicitly set to "LiHV" mode with a cut-off voltage of 4.35V per cell. Never overcharge past this limit.

• Operational Discharge Limit: To preserve long-term battery health and aircraft safety, configure your telemetry low-voltage alarms to trigger no lower than 3.3V per cell under load.

• Storage Requirements: If leaving the pack idle for more than 48 hours, discharge or charge it to a stable storage voltage of 3.80V–3.85V per cell and store it in a cool, dry place inside a fireproof containment box.