We recommend shopping on our main website for local shipping and pricing. Would you like to switch?
Expected ship within 12 hours after order.
Estimated Transit Time: 3-5 Days.
| Brand | Ovonic |
| Chemistry | Li-Polymer(LiPo) |
| Configuration | 3S1P |
| Voltage(V) | 11.1V |
| Capacity(mAh) | 6500mAh |
| Discharge Rate | 80C |
| Max Burst Discharge Rate | 160C |
| Length(dev.5mm) | 135mm |
| Width(dev.2mm) | 42mm |
| Height(dev.2mm) | 33.3mm |
| Net Weight(dev.20g) | 414g |
| Connector Type | XT90 Plug |
| Balance Connector Type | JST-XH |
| Package Content | 1×Ovonic 80C 11.1v 6500mah 3s lipo battery with XT90 Plug |
| 1×User Manual |
Ovonic Rebel 80C 3S 6500mAh LiPo Battery 11.1V Softcase with XT90 Plug is suitable for 1/10 RC car, two for 1/8, 1/7 truck, like TALION 6S BLX.
Pls, note that this is a soft case battery. For some RC cars, Hardcase is recommended to protect the battery better.
Hardcase 3s:
80C 5200mAh 3S EC5, 60C 5200mAh 3S EC5
Softcase 3s :
Softcase 6s:
Ovonic Rebel 80C 11.1v 3s 6500mah lipo battery XT90 pack for most of 1/10 scale RC car, two for 1/8, 1/7 Truck, buggy. Only if the Size, Plug, and voltage match, you can power your car directly. For ARRMA,
One pack fits:
As the ARRMA recommends the Hardcase lipo for these 4x4 cars, you can choose 3s Hardcase lipo batteries, too.
Two for:
A test video from Overkill RC:
Please Notice:
Ovonic Rebel 80C 6500mAh 3S 11.1V LiPo Battery for ARRMA 3S&6S- XT90 Plug
Ovonic Rebel 80C 6500mAh 3S 11.1V LiPo Battery for ARRMA 3S&6S- XT90 Plug
Ovonic Rebel 80C 6500mAh 3S 11.1V LiPo Battery for ARRMA 3S&6S- XT90 Plug
Only used once but had decent run time and they cost less than most other batteries. Time will tell if they are any decent but happy with my purchase at the moment
I bought this to power a Malectrics V4 Spot Welder. As it has 80c Continuous discharge, and I needed at least 65c. It had the correct XT-90 connector I needed too. I did about 45 test welds with the battery, and it worked great. It didn't get warm or puff, or do anything unusual at all. Plus I bought an adapter from XT-90 to Deans T-connector and I ripped around my house with my Losi LMT Monster Truck. It felt punchy and powerful. It's 6500mah so it's large capacity. I ran for probably 10 minutes straight and took it from 4.14v to 3.93v. So, it appears to have awesome discharge ability and great capacity.
Ovonic Rebel 80C 6500mAh 3S 11.1V LiPo Battery for ARRMA 3S&6S- XT90 Plug
Ovonic Rebel 80C 6500mAh 3S 11.1V LiPo Battery for ARRMA 3S&6S- XT90 Plug
Ovonic Rebel 80C 6500mAh 3S 11.1V LiPo Battery for ARRMA 3S&6S- XT90 Plug
Only used once but had decent run time and they cost less than most other batteries. Time will tell if they are any decent but happy with my purchase at the moment
I bought this to power a Malectrics V4 Spot Welder. As it has 80c Continuous discharge, and I needed at least 65c. It had the correct XT-90 connector I needed too. I did about 45 test welds with the battery, and it worked great. It didn't get warm or puff, or do anything unusual at all. Plus I bought an adapter from XT-90 to Deans T-connector and I ripped around my house with my Losi LMT Monster Truck. It felt punchy and powerful. It's 6500mah so it's large capacity. I ran for probably 10 minutes straight and took it from 4.14v to 3.93v. So, it appears to have awesome discharge ability and great capacity.
DHL_EU1 (2–4 business days):
Belgium, Luxembourg, Slovakia, Czech Republic, Hungary, Austria, Netherlands, Denmark, France, Ireland, Italy, Poland, Slovenia, Spain, Finland, Latvia, Lithuania, Sweden, Bulgaria, Estonia, Greece, Mexico, Portugal, Romania
DHL_EU2 (3–7 business days):
Denmark, Iceland, Switzerland, Slovenia, United Kingdom
Unavailable Shipping Destinations:
Croatia, Malta, Cyprus, Liechtenstein, Moldova, Norway, Ukraine, Georgia, Kazakhstan, Turkey
Ovonic Rebel 80C 6500mAh 3S 11.1V LiPo Battery for ARRMA 3S&6S- XT90 Plug
Ovonic Rebel 80C 6500mAh 3S 11.1V LiPo Battery for ARRMA 3S&6S- XT90 Plug
Ovonic Rebel 80C 6500mAh 3S 11.1V LiPo Battery for ARRMA 3S&6S- XT90 Plug
Only used once but had decent run time and they cost less than most other batteries. Time will tell if they are any decent but happy with my purchase at the moment
I bought this to power a Malectrics V4 Spot Welder. As it has 80c Continuous discharge, and I needed at least 65c. It had the correct XT-90 connector I needed too. I did about 45 test welds with the battery, and it worked great. It didn't get warm or puff, or do anything unusual at all. Plus I bought an adapter from XT-90 to Deans T-connector and I ripped around my house with my Losi LMT Monster Truck. It felt punchy and powerful. It's 6500mah so it's large capacity. I ran for probably 10 minutes straight and took it from 4.14v to 3.93v. So, it appears to have awesome discharge ability and great capacity.
Thanks for subscribing!
This email has been registered!
Very good and powerful battery. It lasts 10 minutes on the 7-inch drone. I recommend it to everyone!
6s 5500mAh 80C lipos are of very high quality, and I use them to fly my helicopters, and they work great!
I am extremely satisfied with the Ovonic X4 Lipo Charger. The device charges extremely quickly and works simply great.
I fly because Ovonic 1300mah 100c since the beginning of the year and I am more than thrilled! Since I have unfortunately not had such good experiences with other comparable lipos from other manufacturers. But the 1300 is a force and delivers on 6 min flight time with my 5 inch great performance whether in freestyle or even for cinematic record where the flight time with GoPro is of course only slightly more limited of 4 min. But still a great lipo and can only recommend it. Thank you for the great performance Ovonic best regards Flo_fpv_
Only ovonic please!! 😜 I use only ovonic for my drones. Those 4s are very well made. Good power and endurance for my huma20
