The voltage for RC at use is crucial. The higher the voltage, the more power & r.p.m. If you choose the wrong voltage, you could damage the electronics, or in the case of choosing a lower voltage than required, your model or aircraft will lack serious power and will not operate correctly.
Ovonic 5200mah 6s 80C with a 22.2v voltage and 80C discharge rating, can give your X-Class FPV drone more power and punch
If you need other 6s LiPo for aircraft and FPV drone, 100C 6500mah 6S is for RC car and UAV drone, 5000mah 6s EC5 is for EDF, Heli etc.
Ovonic 6s 5200mah lipo battery specification:
- Discharge Rate: 80C
- Max Burst Discharge Rate: 160C
- Length(dev.5mm) : 140.5mm
- Width(dev.2mm) : 44mm
- Height(dev.2mm) : 58.2mm
- Net Weight(dev.20g)：710g
- Connector Type: AS150 Plug
For the RC battery, only if the voltage and the plug match, then it will fit.
Please stop charging immediately when the cell voltage been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use Balance Charger to charge and recycle several times first.